High speed doors in the use of maintenance methods

High speed doors in the use of maintenance methods

1. Pumping station

The pump station is a key part of all the fast doors. Once the pump station has problems, that is to say, it is declared to stop working, even if the other parts are good and without any damage, they can not work. The pump station is composed of a lot of parts, one of the most prone to problems with dust ring, O-ring, steel ball and other parts, once found that these parts have problems or wear and damage in the use of the process, the easiest and fastest solution is to replace, replace these parts.

2. Strut

The supporting rod is the key component connecting the pump station and the rod, the lifting support of the hydraulic cylinder, the carrying capacity of the goods are supported by the supporting rod and achieve a balance, because in the handling of goods, there may be overload, partial load and other phenomena often lead to the supporting rod 3, electronic switch

In the operation, the electronic switch is the main operation button, the use frequency is very high, if the button failure and other circumstances, should immediately stop working, and disconnect the power supply, maintenance, do not blindly use, to prevent the occurrence of safety hazards.

www.v-signindustrial.com