How to debug and deliver the fast doors

How to debug and deliver the fast doors

1, upper and lower limit debugging test: when the door is stationary, press the up button, the door runs up, after buffering is completed, determine whether the lifting height meets user requirements. If it does not meet the requirements, re-debug, then press the down button and wait for the door body to stop falling completely. Observe whether the end position of the door body is natural and correct.

2, the emergency stop button performance test: in the door process, press the emergency stop button, observe whether the door immediately stop. If it is still running properly, check the emergency stop button to see if it is faulty or damaged.

3, automatic door opening function debugging: using the movement of vehicles and personnel to simulate the actual situation, observe whether the door can be opened in time, whether there is no dead Angle signal coverage.

4, infrared anti-hit performance debugging: in the process of the door falling, cut off the infrared camera system to check whether the door will rebound in time. During the test, pay attention to your own safety to prevent damage caused by infrared system faults.

www.v-signindustrial.com