Install Fast Rolling Shutter Doors

How to install the fast rolling door more firmly ?

Everyone should be familiar with the fast rolling door. It is a kind of fast door with a running speed of more than 0.6 meters per second. Its main function is to quickly isolate and ensure the clean air quality of the workshop. So, how to make it stronger when installing the fast rolling door, the following editor will give a specific explanation.

First draw a line at the opening of the door frame to be installed. Indicate the size, and then ask the staff to design a suitable electric rolling door. It is worth noting here that the height of the frame is a little higher than the height of the door leaf.

Then fix the door frame of the Fast Action Roller Shutter Doors. Here, the fixing plate at the lower part of the fast rolling door frame must be removed first. Note that grooves should be reserved on the ground on both sides of the hole. After the calibration is qualified, the wooden wedge is fixed, and the iron feet of the door frame are welded firmly with the embedded iron plate. Cement mortar or fine stone concrete with a strength not less than 10MPa can be firmly embedded.

Finally, install the main door leaf of the fast rolling door leaf. It is necessary to ensure that the fast rolling door and the wall are integrated, and the sealing performance must be done well, and then the opening and the wall are painted. After the painting is completed, the fast rolling door gap should be even and smooth, and the fast rolling door should be opened freely and lightly, without excessive tightness, looseness or rebound.

www.v-signindustrial.com