The focus of regular maintenance of high speed industrial door

The focus of regular maintenance of High Speed Industrial Doors

1. Every three months, all screws including springs, hinges, door panels, etc. of industrial doors must be refastened;

2. Adjust the pulley on the industrial door every three months until the pulley runs flexibly on the track;

3. When using industrial doors, often pay attention to the switch threshold of industrial doors, once the trip changes to adjust in time, so as not to burn out the motor;

4. Whether the noise generated when the motor is running is normal. If there is any abnormality, arrange the personnel of the industrial door manufacturer to deal with it in time;

5. Pay attention to check whether the industrial door on both sides of the level, if the door body imbalance, it needs to readjust;

6 to the industrial door track, pulley, spring, anti-wire rope breaking device refueling and maintenance, to maintain the normal and smooth operation of the door body;

7. Use an ammeter to check the operation of the motor. Under normal circumstances, the current generated when the industrial door opens and closes is roughly the same. If the opening current is significantly greater than the closing current, it proves that the spring has to increase the number of springs, until the size of the opening and closing current almost stop;

8. Industrial door motor maintenance is strictly prohibited to disassemble and replace any parts without authorization, and avoid danger. Once abnormal conditions occur, please contact industrial door manufacturers in time.

www.v-signindustrial.com