PVC fast door remote control no response

PVC fast door remote control no response

1. Check whether the main switch of the power supply of the PVC rolling shutter door is turned off. If it is turned off, open the switching power supply system.

2. there will be no power controller rechargeable battery, the vast majority of the automatic door remote control battery is 23A/12V rechargeable battery, most of the small shop can buy.

3. Check whether the controller keys are damaged or water leakage, sometimes the controller in the whole process of long-term, do not pay attention to will be broken or water leakage, if you have to replace the new controller.

4. Check whether the positive and negative of the junction box of PVC high speed rolling shutter door is properly installed.

5. The distance between the controller and PVC high speed rolling shutter dooris far away or there are data signal interference signals around it.

6. If the PVC high speed rolling shutter door electric head has a fitness movement sound, but it does not move, there will be dirt around the electric head, and the PVC high speed rolling shutter door is stuck, and the dirt can be eliminated.

7. If the electric PVC high speed rolling shutter door is connected to the power supply and the electric head is not connected to the power supply, the connection route will be short-circuited. It is necessary to find the short-circuited area and connect the power plug again.

www.v-signindustrial.com