The solid wood door does not crack method

1. First, there is an awning so that rainwater can directly pour on the door;

2. The expansion and contraction of the door panel is not only affected by the natural environment, but also related to the degree of deformation of the material itself;

3. Materials with less deformation can be used, and the moisture content of the materials should be controlled;

4. According to the local natural climatic conditions, the wood we produce for door leaves must be dried, and the moisture must be regained for more than a week, so that the material has a sufficient curing period, and the moisture content of the material is stabilized at about 12%, and then the material processing is started. .

5. In addition, the moisture content of the material in the production process should be controlled well. From the opening to the semi-finished product, it is necessary to ensure that the material does not absorb moisture and the moisture content does not increase before the paint is delivered. This requires materials to be placed in a constant temperature room in time to keep the moisture content of the wood from rising.

6. In the production process, through the different knots of the falcon structure, the most important part of the door structure can be deformed, and the anti-deformation tape is added to minimize the deformation.

www.v-signindustrial.com